Additional information
| Brand |
|---|
The Adaptive Power Module family is a group of modular products for the control of lighting loads. This product is compatible with Lutron® HomeWorks® QS systems only. This document describes the following product:
• LQSE-4A1-D – 4 zone power module for phase control dimming.
Features
• Leading-edge or trailing-edge dimming for incandescent/ halogen, electronic / magnetic
low-voltage, and neon / cold cathode light sources.
• Controls dimmable CFL/LED loads.
• RTISS Equipped® technology compensates for incoming line-voltage variations (up to ± 2% change in frequency/ second) such as changes in RMS voltage, frequency shifts, harmonics and line noise.
• Integral protection for temporary over-current and over-voltage conditions.
• SSL7 compliant for compatibility with Solid State Lighting.
• Includes QS link for seamless connection to a HomeWorks® QS system.
• LEDs on module provide diagnostic information.
• Buttons on module provide load override control.
• Manual Override Contact Closure Input (CCI).
• Power failure memory
Regulatory Approvals
• 120–240 V~ 50/60 Hz
– UL® Listed
– cUL® Listed
– NOM Certified
• 220–240 V~ 50/60 Hz
– IEC/EN 60669
• Lutron® Quality Systems registered to ISO 9001.2008
Power
• 120–240 V~ 50/60 Hz (cULus and NOM)
• 220–240 V~ 50/60 Hz (IEC/EN 60669)
• Single input feed
• 4 A maximum total input current
• Lightning strike protection meets ANSI/IEEE standard
C62.41 and IEC 61000-4-5. Can withstand voltage
surges of up to 6 000 V~ and current surges of up to
3 000 A.
• ESD protected above agency requirements per
IEC 60669-2-1
• For ungrounded delta feed applications, contact Lutron.
Environment
• For thermal specifications, see Output Zone Rating
and Mounting section
• Relative humidity: less than 90% non-condensing
• For indoor use only