Additional information
| Brand |
|---|
The Power Module with EcoSystemR unit is a DIN-rail mounted EcoSystem® Loop controller for EcoSystemR ballasts, drivers and devices. It provides EcoSystemR Loop power and control for two independent EcoSystemR Loops with up to 64 ballasts or drivers each.
Features
• Provides EcoSystemR Loop power for two loops
of EcoSystemR ballasts or drivers (up to 250 mA per loop).
• Power failure memory retains control unit programming in the event of a power loss.
• Includes QS Link for connection to a HomeWorksR QS system.
• Power Module with EcoSystemR unit can be used in a HomeWorksR QS system to control and manage light in an entire home or building.
Power
• 120 V~ 50/60 Hz 120 mA
• 230 V~ 50/60 Hz 80 mA
• Lightning strike protection meets ANSI/IEEE standard 62.31-1980. Can withstand voltage surges of up to 6000 V~ and current surges of up to 3000 A.
• Stand by power: 7 W
• BTUs/hour when fully loaded: 24
• EcoSystemR Loop Output: 16 V- 250 mA maximum per loop.
Standards
• UL
• CE
• Lutron Quality Systems registered to ISO 9001.2008.
• C-Tick S
• cUL
• NOM
Environment
• Surrounding Air Temperature Range: 0 ºC to 65 ºC (32 ºF to 149 ºF).
• Relative humidity: less than 90% non-condensing.
• Calibration point maximum: 75 ºC (167 ºF)
• For indoor use only.
Terminals
• Mains wiring: 1.0 mm2 to 4.0 mm2 (18 AWG to 12 AWG)
• EcoSystemR Loop Wiring: 1,0 mm2 to 4,0 mm2 (18 AWG to 12 AWG)
• QS Wiring: 1,0 mm2 (18 AWG)
• Minimum wire temperature rating = 65 °C (149 ºF), Cu only
Mounting
• Intended to mount within an IP20 (minimum) rated consumer panel or breaker panel with integrated DIN rail and dead cover
• Width = 9 DIN modules (161.7 mm or 6 3⁄8 in).