The IG6s2M features the Generation 2 Metal Diaphragm Technology cone that is lighter and stiffer than the original MDT cone. The result is a broadband 3dB increase in sensitivity and more than 4dB in the midrange – making the IG6s2M easier for amplifiers to drive and better sounding with more “open” midrange and greater vocal presence.
 
- Purpose-built to be extremely durable in all weather conditions, mounted in-ground
 
- Stylish design provides functional rigidity and extra security when buried
 
- Generation 2 anodized metal alloy speaker cones (MDT) maintain specified performance over a broad range of temperatures (-20 to +160 degrees F; -29 – +71 C) for consistent sound quality in every season
 
- UDIO (upside down/inside out) driver employs voice coils wound both inside and outside the former for extremely accurate linearity, even at extreme volume levels
 
- Heavy gauge epoxy-coated stainless steel grille withstands rigors of outdoor living
 
- MLS spiderless motor uses specially developed ferrofluid to center the voice coil and eliminates the distortion generated by spiders
 
- Sealed magnet gap locks out moisture and debris
 
- 1” coincident-mounted tweeter with 6.5” woofer positioned for optimum dispersion
 
- LLDP (Linear Low-Density Polyethylene) color-through enclosures are acoustically inert and stand tough under abuse and in extreme conditions
 
- Advanced polymer cone surrounds resist UV rays, chlorine, fertilizer and salt spray
 
- 70V multi-tap transformer standard for use with the NEAR 6XL power amplifier in 70V operation – can be by-passed for 8 ohm use
 
- Signal connection via pre terminated 8-conductor burial grade cable exiting the bottom of the enclosure
 
- Color: Mulch Brown enclosure with matching grille
 
 
			 
					
				
- Frequency Response – 45Hz-17.5kHz, +/-2.5dB
 
- Sensitivity (1W/1m) – 87dB
 
- Dispersion – 360 Degrees
 
- Power Requirements (@8 ohms)  – Up to 150 Watts (Ave);
 
- Power Requirements (@70V) – 64W, 32W, 16W, 8W, 4W
 
- Dimensions  – 16” Diameter at Base x 17.75” High
 
- Product Weight – 7.48kgs
 
- Maximum SPL @1m (1/2 space) – 108dB
 
- Input Terminations – 8 Cond. Cable
 
- Environmental – Engineered to Meet or Exceed Mil-Std-810 (Humidity, Salt Air, Heat, Cold, Immersion); IEC IP65
 
SPEAKER COMPLEMENT:
• (1) 6.5” Metal-Alloy Diaphragm UDIO Woofer, MLS Voice Coil Guidance, UV and Chemical-Resistant Rubber Surround
• (1) 1.0” Titanium-Alloy Diaphragm Tweeter, Ferrofluid Thermo Coupling & Damping, UV and Chemical-Resistant Rubber Surround, Corrosion-Resistant Magnet Assembly