Key Features

• Event and schedule controlled switching
• Precise current metering per power outlet of up to 9 units and residual current
• Connector for plug-and-play sensors for real-time monitoring
• Fast and easy installation on support rails with hat profile
• NTP function can be activated
• More flexibility through Radius, Modbus TCP and MQTT 3.1.1 support

Switching function

• Each power port can be switched via HTTP/S, Telnet, SSH, SNMP or command line interface
• Programmable on/off sequences for remote reboots (Remote Reboot)
• Power ports can be switched when preset sensor thresholds are exceeded
• Self-healing function thanks to 5-channel watchdog: The power ports can be assigned its own Watchdog (ICMP/TCP), which initiates an automatic restart if necessary
• Switching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure
• Current peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second

Metering function

• Power consumption metering (kwH) per power outlet with 2 energy counters: one counter counts consistently, the other counter is resettable
• Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
• Connector for combined plug-and-play sensors (temperature, humidity and air pressure) to prevent physical hazards that often occur, such as overheating and increased humidity or air pressure.

Security

• Generation of status messages via e-mail, syslog, SNMP traps, Telnet, SSH and MQTT depending on set thresholds of sensor measurement
• Encrypted e-mails (SSL, STARTTLS)
• Access protection by IP access control
• Encrypted communication through SSH
• Secure Login via SSL
• Beeper for audible alarm when sensor limits are exceeded/deceeded

Operation

• Easy-to-read LED display for displaying total current, IP address, sensor values and error messages
• Firmware update via Ethernet during operation (no restart required)
• Simple and flexible configuration via web browser, Windows or Linux program
• Dynamic assignment of an IP address via DHCP or manual assignment of static IP address
• Convenient control on the go via free GUDE Control+ app (Android and iOS)
• Rapid commissioning thanks to free and reliable drivers from our technology partners