1121-1

GUDE

Details

Small 2-fold switched and metered PDU

Enquire
Category: Tag:

Additional information

Brand

Expert Power Control 1121-1 for more operational security and energy efficiency in small installations

  • Demonstrably fewer and shorter outages of your critical IT and AV infrastructure
  • Very compact housing design allows space-saving integration even in confined AV environments such as media furniture
  • Detect AV and IT problems at an early stage: Proactive power and environment monitoring
  • Measurably increased energy efficiency (Green IT and AV): Electricity cost and CO2 savings through controlled switching off of devices
  • Integrate anywhere: Quickly and easily integrate anywhere with API interface: REST API, HTTPS, SNMP, Telnet and MQTT
  • Fix AV and IT problems quickly and effectively: Remote reboot or with the self-healing function (automatic restart) thanks to integrated watchdogs
Key Features
  • Simple and quick mounting even in the smallest AV installation
  • Event and schedule controlled switching
  • Self-healing function
  • Precise current metering of up to 9 electrical units and residual current
  • Connector for plug-and-play sensors
  • Lightweight and robust plastic housing
  • Hybrid surge protection (SPD type 3)
Switching function
  • Each power port can be switched via HTTP(S), SNMP, ModbusTCP or command line interface via Telnet, SSH or MQTT
  • Programmable on/off sequences for remote reboots (Remote Reboot)
  • Power ports can be switched when pre-set sensor thresholds are exceeded
  • Self-healing function thanks to 2-channel watchdog: Each power port can be assigned its own Watchdog (ICMP/TCP), which initiates a fully automatic restart if necessary
  • Switching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure
  • Current peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second
Metering function
  • Power consumption metering (kwH) with 2 energy counters: one counter counts consistently, the other counter is resettable
  • Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
  • Connector for combined plug-and-play sensors (temperature, humidity and air pressure) to prevent often occurring physical hazards like overheating and increased humidity or air pressure
Security
  • Integrated type 3 overvoltage protection prevents damage to the device and connected loads
  • Long-life High-Inrush Relays prevent welding of relay contacts during inrush current peaks
  • Generation of status messages and alarms (e-mail, syslog, SNMP traps MQTT, SSH, Telnet)
  • Encrypted e-mails (SSL, STARTTLS)
  • Access protection by IP access control
  • Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
  • Password protected access
  • Beeper for audible alarm when sensor limits are exceeded/deceeded
Operation
  • Easy-to-read LEDs displaying switching status of outlets and device status
  • Firmware update via Ethernet during operation (no restart required)
  • Simple and flexible configuration via web browser, Windows or Linux program
  • Dynamic assignment of an IP address via DHCP or manual assignment of static IP address
  • Rapid commissioning thanks to free and reliable drivers from our technology partners
Technical Details
  • Integrated type 3 overvoltage protection (L-N, L/N-PE), status retrievable via network
  • High-inrush relay: max. 4 sec: 30 A /max. 20 ms: 80 A
  • Measurement of key electrical parameters: current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
  • Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
  • LxDxH: 168 x 86 x 34 mm (without mounting brackets)
  • Weight: approx 450 g
  • Operating temperature: 0-50 °C
  • Storage temperature: -20 – 70 °C
  • Relative humidity: 0 – 95 % (non condensing)
Electrical Connections
  • 1 power supply IEC C14 (max. 10 A, 230 V)
  • 2 power ports IEC C13 (max. 10 A)
  • 1 Ethernet connector RJ45 (10/100 Mbit/s)
  • 1 sensor connector (RJ45) for plug-&-play sensors