LQSE-2DAL-D

Lutron

Details

DALI Power Module, 2 Loops with 64 Ballasts each

Enquire
Category: Tag:

Additional information

Brand

The DALI Power Module is a DIN-rail mounted controller for DALI-compliant digital addressable loads, referred to as control gear. It provides DALI bus power and control for two independent DALI buses with up to 64 DALI-compliant digital addressable loads each.
Model Number

LQSE-2DAL-D: 2-link DALI fixture controller

Features
• Provides power for two buses of DALI-compliant digital addressable loads:
– 128 mA guaranteed current
– 250 mA maximum supply current per bus
• Each DALI bus can control a maximum of 16 zones.
• Power failure memory retains programming in the event of a power loss.
• DALI Power Module can be used in a HomeWorks QS system to control and manage light
in an entire home or building.

Power
• 120 V~ 50/60 Hz 120 mA
• 230 V~ 50/60 Hz 80 mA
• Lightning strike protection meets ANSI/IEEE standard 62.31-1980. Can withstand voltage surges of up to 6000 V~ and current surges of up to 3000 A.
• Stand by power: 7 W
• BTUs/hour when fully loaded: 24
• DALI bus Output: 16 V- 128 mA guaranteed supply current, 250 mA maximum supply current per bus.

Standards
• Lutron Quality Systems registered to ISO 9001:2015.
• IEC 60669-2-1
• DALI-2 Certified
• UL
• cUL
• NOM

DALI Control Gear Compatibility
• DALI-2 Certified; Compatible with DALI control gear (e.g. LED drivers).
• The LQSE-2DAL-D is a single master controller and therefore no other controllers may exist on the same DALI bus.

Environment
• Surrounding Air Temperature Range: 0 ºC to 65 ºC (32 ºF to 149 ºF).
• Relative Humidity: less than 90% non-condensing.
• Calibration point maximum: 75 ºC (167 ºF)
• For indoor use only.

Terminals
• Mains Wiring: 1.0 mm2 to 4.0 mm2 (18 AWG to 10 AWG)
• DALI bus Wiring: 0.5 mm2 to 4.0 mm2 (20 AWG to 10 AWG)
• QS Link Wiring: 0.5 mm2 to 4.0 mm2 (20 AWG to 10 AWG)
• Minimum wire temperature rating = 65 °C (149 ºF), copper wire only